01052011_Unistrut_US


KWIK-FIT® COMPRESSION EMT

Steel EMT with an Integral Compression Fitting

  • Integral Compression Fitting

  • Fast 2 Step Installation

  • E-Z Pull® Interior Coating for Fast Wire-Pulling

  • Material & Labor Savings

Kwik-Fit® Compression EMT has an integrated steel compression coupling. These built-in compression couplings significantly reduce installation time, and eliminate the need to purchase and store separate couplings. Simply insert the plain end of the EMT into the compression coupling end and tighten the gland nut.

Kwik-Fit® Compression EMT is all steel for superior strength, performance and excellent ground return. Allied Tube & Conduit's unique in-line Flo-Coat® hot galvanizing process fully protects Kwik-Fit® Compression EMT with a triple-sealed compatible organic layer designed to protect against white rust and increase corrosion resistance.

The interior of Kwik-Fit® Compression EMT is protected with Allied Tube & Conduit's superior E-Z Pull® interior coating. The new coating makes wire-pulling even easier with lower coefficient of static friction.

Unlike traditional compression couplings only one gland nut is needed to be tightened. Kwik-Fit® Compression EMT can reduce the installation time by over 50%*.

* Installation time will vary with job site conditions.

FEATURES

  • No extra fittings to inventory, purchase, store, or install
  • Hot-galvanized steel for durability
  • Strength combined with ductility for easy bending
  • E-Z Pull® Interior finish provides a smooth raceway for fast wire-pulling
  • Superb EMI shielding characteristics

NEC® APPROVED FOR PLENUM USE

Meets the requirements of section 300.22 of the National Electrical Code® (NEC), and sections 18-27-300.22(b)(1) and 18-27-300.22(c)(1)(a) of the Chicago Electrical Code.

UL LISTED

Listed to UL Safety Standards 797 and 514-B. Kwik-Fit® Compression EMT also meets ANSI Standard C80.3.


SPECIFICATIONS

INSTALLATION STEPS

Step 1:

Insert the plain end of the EMT into the integral fitting end of another piece of Kwik-Fit® Compression EMT. Insert fully until seated.

Step 2:

Turn the gland nut until it is snug. Tighten nut with pliers or wrench. Done! Kwik-Fit® Compression EMT can reduce the installation time by over 50%*.

* Installation time will vary with job site conditions.


WEIGHTS & DIMENSIONS



e_document
Browse Catalog


Spec Sheet
Kwik-Fit™ and
Kwik-Fit™ Compression EMT


KWIK-FIT®
COMPRESSION EMT
Rectangular Bundles