The Industry’s Best All-in-One Conduit Solution!
For fast & easy GRC installations, make it Super Kwik-Couple Raintight Conduit!
- Fastest installation times
- UL listed for wet and dry locations
- Permitted for use in Class I Division 2 locations per section 501.10(B)(1) of the NEC
- Blue colored coupling design allows inspectors to easily identify wet location approval
- Patented UL approved design to connect both threaded and unthreaded conduit
- Even connect to EMT
- Eliminates the need for field threading
- Coupling design allows for easy installation in compact areas
- Available in trade sizes ½” to 5″
- Also available on elbows
Full Electrical System Protection
Super Kwik-Couple Raintight Rigid steel conduit from Allied Tube & Conduit is manufactured from mild steel and is highly resistant to damage from impact yet ductile to facilitate bending.
Color-coded end cap thread protectors keep the threads clean, sharp and also provide instant trade size recognition. Even sizes are color-coded blue, 1/2 sizes black, and 1/4 sizes red.
Coatings
Conduit: Hot-dip galvanized inside and out providing galvanic corrosion protection. In addition, top coated with a compatible organic layer to protect against white rust. The inside surface is evenly coated for wire-pulling ease, even through multiple 90° bends.
Coupling: Electro galvanized inside and out to provide galvanic corrosion protection.
EMI Shielding
Allied Tube & Conduit Rigid Steel Conduit is extremely effective in reducing the effects of electromagnetic field levels for encased power distribution circuits, shielding computers and other sensitive electronic equipment from the effects of electromagnetic interference. Obtain information about the GEMI (Grounding and Electro-Magnetic Interference) software analysis program.
Codes & Standards Compliance
Allied Tube & Conduit Super Kwik-Couple Raintight Rigid steel conduit is precision manufactured for dependable, long-lasting value and ultimate protection for electrical conductors. Covered by article 344 of the National Electrical Code (NEC), rigid steel conduit is highly resistant to damage from impact. Rigid steel conduit is recognized as an equipment grounding conductor in Section 250.118 of the NEC. Super Kwik-Couple Raintight Rigid steel conduit is listed to UL Safety Standard 6 and UL 514-B. Super Kwik-Couple Raintight Rigid steel conduit is listed for wet location applications. It is permitted for use in Class I Division 2 locations per section 501.10(B)(1) of the NEC. It is also manufactured to ANSI C80.1, both of which have been adopted as Federal Specifications in lieu of WWC 581.
Installation of Rigid Metal Conduit shall be in accordance with the National Electrical Code and UL General Information card #DYIX. Master bundles conform to NEMA standard RN2.
Specification Data
To specify, Super Kwik-Couple Raintight Rigid steel conduit include the following: Rigid Steel Conduit shall be hot-dip galvanized and manufactured by Allied Tube & Conduit. Threads shall be hot galvanized after cutting. Rigid steel conduit shall be listed to UL Safety Standard 6 by a nationally-recognized testing laboratory with follow up service. It shall be manufactured in accordance with ANSI C80.1.
Super Kwik-Couple Raintight Rigid steel conduit shall be listed to UL 6 and UL 514B and manufactured in accordance with ANSI C80.1.
Note: Federal specification WW-C-581, Class 1, Type A has been superseded by UL Standard 6, which has been adopted by the federal government.
Listed to Underwriters Laboratories Safety Standard UL 6
Manufactured in accordance with ANSI C80.1
| Trade Size (in) | Trade Size (mm) | Outside Diameter* (in) | Outside Diameter* (mm) | Nominal Wall Thickness (in) | Nominal Wall Thickness (mm) | Approx Weight Per 100 Ft. (30.5M) (lb) | Approx Weight Per 100 Ft. (30.5M) (kg) | Bundle Quantity (ft) | Bundle Quantity (m) |
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 16 | 0.84 | 21.34 | 0.104 | 2.64 | 83 | 37.6 | 1600 | 487.8 |
| 3/4" | 21 | 1.05 | 26.67 | 0.107 | 2.72 | 110 | 49.9 | 1260 | 384.1 |
| 1" | 27 | 1.315 | 33.4 | 0.126 | 3.2 | 162 | 73.5 | 840 | 256.1 |
| 1 1/4" | 35 | 1.66 | 42.16 | 0.133 | 3.38 | 220 | 99.8 | 700 | 213.4 |
| 1 1/2" | 41 | 1.9 | 48.26 | 0.138 | 3.51 | 265 | 120.2 | 600 | 182.9 |
| 2" | 53 | 2.375 | 60.33 | 0.146 | 3.71 | 351 | 159.2 | 450 | 137.2 |
| 2 1/2" | 63 | 2.875 | 73.03 | 0.193 | 4.9 | 559 | 253.6 | 400 | 122 |
| 3" | 78 | 3.5 | 88.9 | 0.205 | 5.21 | 726 | 329.3 | 300 | 91.5 |
| 3 1/2" | 91 | 4 | 101.6 | 0.215 | 5.46 | 872 | 395.5 | 250 | 76.3 |
| 4" | 103 | 4.5 | 114.3 | 0.225 | 5.72 | 1036 | 469.9 | 200 | 61 |
| 5" | 129 | 5.563 | 141.3 | 0.245 | 6.22 | 1414 | 641.4 | 150 | 45.7 |
| *Tolerances: Trade Size 1/2" to 11/2" ±0.015” (0.38mm); Trade Size 2-5: ±1% **For information only. Not a requirement of the UL standard. |
|||||||||