EYD Male-Female Hubs

PVC Coated EYD Male-Female Hub Sealing Fittings are used in hazardous locations to prevent flame and gas from continuing to travel through the conduit system. PVC coating provides corrosion protection. A sealing compound should be used on the interior after wiring. Compound supplied by the original fitting manufacturer.

Features

• Exterior PVC coating thickness is a minimum 0.040″
• Interior Urethane coating thickness is a minimum 0.002″
• Sizes available are 1/2″ to 4″
• The length of the sleeve extension(s) shall be at least equivalent to the nominal conduit size for sizes 1/2″- 2″. For sizes 2-1/2″- 6″, the length of the sleeve extension(s) shall be at least 2″.
• Sealing sleeve is provided on plug hub (patching compound recommended on top of plug)
• Mating sealing forms are provided on all caps
• Sealing sleeves on all conduit openings
• Available in steel and aluminum

Standards

• NEC/CEC
  • EYD-11-101, 116-1016
    Class I, Division 1 & 2, Groups B, C, D
    Class III
  • EYD1-10, 16-106
    Class I, Division 1 & 2, Groups C,D
    Class III
  • EZD10-60, 111-611
    Class I, Division 1 & 2, Groups C,D
    Class III
• UL Standard: 886
• CSA Standard: C22.2